Focus=Low, Drive=High

For someone with the attention span of a gnat, I'm still making progress on stitching. I think both my ADHD and OCD are kicking into gear, so it's causing me to stitch almost everyday even though I can't pay enough attention to make much progress. I tried really hard to work on Faces 167, but I literally couldn't see it! I already had an eye doctor's appointment this week, so maybe I can get it straightened out next time this one rolls around. I should have never tried 32ct, it was a test run for the SS/MC bookshelves (which I didn't want to be gigantic, but I started the first one on 28ct anyway, so why did I torture myself with a test run that would be a total project?). Oh well, lesson learned! As I mentioned in my last post, I left off on this one on Jan 29th, 2024 with 14,533 stitches done out of 50,175, which makes a total 28.96% done (as well as 68.43 hrs in):

I literally worked on it for one night, moving up to only 14,817/50,175 (or 284 stitches) and another 1.84 hrs of stitching (I think I spent more time squinting than stitching, which is what you'll have to do to see the progress):

I gave up and decided on Sleepy Hollow Mural by Lewis T. Johnson, another HAED (I've been on HAED kick I guess). I left off on this one Feb 11, 2024, 10,407 stitches in out of 246,000, or 4.23% and 150.93 hrs.

The issue with this one is it is so dad-gum wide! I thought it would be easier if it was on scroll rods instead of a q-snap (I still can't get the hang of q-snaps), but apparently not. The q-snaps really warped the fabric as well, probably because I'm not good at using them. I had issue mounting Sleepy Hollow on my newish stand because it kept tipping over due to the width and the weight of it, so I put it in the stand that these particular scroll rods go on, but it's a center-mount lap stand that doesn't work well when you have a pup sitting between your legs. I literally have to sit the stand on his back, which he doesn't mind, but it makes me uncomfortable and constantly aware of the pressure I use. He is, afterall, only 9lbs and really old. I think he thinks of it as shiatsu-Shih-Tzu massage...I personally wouldn't like it if there was this constantly-moving, twice-my-size, wooden cross stitch stand moving all over my back. And it's not like I can put him down, he just sits in the floor in front of me and barks until I pick him up again. Spoiled brat! After two days of fighting with it and him (technically three, but you'll see in a mo-mo), I gave up on this one too at 11,958/246,000 (or 1551 stitches in), or 4.86%. It was an additional 6.49 hrs, making it a total of 157.42, but the third day was only composed of 0.08 hrs, so that's why I'm only counting two days on this one (and here it is in all its wide glory):

Friday night was a tornado night (it's that season again), so I was paying more attention to the weather instead of stitching. Saturday, I spent the day cleaning carpets, washing various blankets and whatnots, and putting down the new throw rugs I bought weeks ago. I also went through all the pending printed cross stitch patterns that have been sitting in a box in my entryway for over a year or maybe two. I sorted them into their various binders as well as ordering new binders for the ones that were left (not that there is room on those shelves for more binders, so I guess they will all live in the closet). Overall, it was just a crappy day for stitching. I did, however, pick up Evil Queen, which is a pattern from Thread Geeks, late on Saturday. I last left off on her on Feb 26, 2024 (one of my leap year starts) and she previously only got one day of love, which got her 3.7 hrs, 934 stitches out of 86,688 and 1.08%.

Since I only stitched a bit Saturday night, I was super-determined on Sunday and did a pretty good job, if I do say so myself! I'm sure it's because this one is a non-dithered pattern, but I literally put in 13.92 hrs Sat night and all day Sunday (and 10.5 hrs of that was Sunday alone). I'm now up to 4595/86,688 (or 3661 more stitches) which is 5.3%:

Regina is my project for this week, but I'm just gonna take it day by day (I could literally change projects tonight if the mood hits, and I'm just going with that mentality). The thing about this one that bugs me is it's all greens and tans and blacks, even though the mockup looks all blues and purples and pinks and blacks (and the purple-blue family are technically more in Regina's wheelhouse anyway):

I would chalk it up to not being at the purple-blue area yet, but there is not a single thread in the box for those shades. I'm really curious to see how it's going to turn out and I'm a bit worried as well. I would hate to get pretty far into this and realize all the colors are off (another Alice and the B's quandry). Oh well, we'll see how this week goes. I still have numerous stitch projects I haven't touched yet before I rotate back around again. Plus, as of now, all that area to the far left on Regina is nothing but black, and I'm not sure I want to get into another Hook issue where I'm stitching nothing but a solid background (and Hook will be coming up soon because the background triggered me).

Speaking of Hook, the issue with it is, I'm constantly thinking I should restart it on white and just ignore the background instead of stitching it. But I also don't want to get far enough in (like Snow White) where I can't go back because I'm too far gone. Plus, I'm thinking about the other three that make up this set (there is a Jefferson, August and Graham to match and do I really want to do all this background stitching three more times?). I left off on Hook by Tilton Crafts on Feb 1st, 2024 at 61.1 hrs in, 14,418/148,750 stitches in or 9.69%:

But, as you can see, there is still a ton more white to do yet. Ugh. I'm just not ready to let it go and start over though. I just keep thinking (and probably stupidly), what an accomplishment all that background stitching will be and how amazing it will look when finished (again, probably a stupid thought). I wish "work smarter not harder" was my motto, but apparently I missed the day they handed out "logical goals".

And, just for reminder, here is Hook, followed by Jefferson, Graham and August (and that's a LOT of white):

Here's something I need your guys help with...how do you exclusively use electronic patterns? I'm still stuck in paper world (hence the bindering up of patterns on Saturday). Since I stitch two-handed on scroll rods, they cover my legs completely and block my view of the tablet. I keep the paper copy clipped to the top with a hair clip and can use my right hand well enough to mark off with a colored crayon (but there is no way my right is dexterous enough to use an iPencil on an iPad). The paper pattern is constantly in my face and makes it easy for my eyes to shift back and forth, whereas I only use the tablet to keep track of progress by marking off the stitching at the end of the night and clocking in and out of a time keeper app for time. The project isn't strong enough to hold the iPad and I can't see a smaller Android tablet (and I don't like them, I just live in Apple world). I can't stitch one-handed anymore because, well, it's way slower, and my right hand just cramps closed around it and I have to pry it open (and it hurts). That's the reason why I had to stop playing video games, the neuropathy keeps me from knowing how hard I'm gripping something. Do you guys use a tablet stand? Not that I have any room on the left for it, but if I thought it would work, I could try it. Do you just keep pulling the tablet up and down? I can't be the only person that works two-handed, am I? Any thoughts or ideas you have would be greatly appreciated!

Best laid plans...

I barely stitched this week. Partly, because I wasn't in the mood, and partly because I was working on building my new scroll rods, a process I did NOT enjoy. I didn't plan the process out very well. I got the right amount of dowels (which was more of a case of not knowing which circumference to get, so I got a lot to try), but I didn't get enough of the side 1x2 boards (I only bought two), which ended up making five sets (not nearly enough for the number of dowel sets I had, but I also kept changing their length, hence the abnormal number), and the hanger bolts recommended in the video seemed really big to me, especially compared to the bolts in the scroll rods I usually buy that are built similarly (those are way smaller in diameter), but I don't know enough about measurements to figure out how to get a smaller size. She mentioned in the video that sometimes they split. I can see why (and I almost split one). I also didn't even come close to getting enough hanger bolts because I didn't account that I'd need two packs (there were two per pack) for each scroll rod frame (two for each dowel, two dowels per scroll rod frame). That meant that I also didn't have enough twisty knobs for the sides...it was an overall mess.

By Saturday, I had already built another Lowe's cart that was reaching up to the $100 mark for more supplies to finish the other rods. But then, I decided I needed to do a test first before I spent anymore money, so I took the scroll frame I made for Bookshelf, since it was the biggest, (only one of three that I had actually finished), put the fabric on it, and got the shock of my life...it wouldn't stay stable! The knobs wouldn't tighten, they just kept spinning (which washers might fix, but that meant yet another purchase that may, or may not, work), the fabric was super loose, and it was a wobbly mess! To say my frustration level was on high, is an understatement. I still don't know how the lady in the video made hers work, but here's mine. I took a picture of it on Sunday night after I calmed down a bit (and it's only part of it, the whole thing is 4' tall and I didn't feel like framing a photo properly by this point):

Sleepy Hollow Mural is also long, but its frame is store bought has a stablizer bar at the top which keeps it from being wobbly (which it is without that stablizer bar, a fact I had actually forgotten). I do typically prefer the bought scroll rods that are built with bolts in the ends with knobs to tighten them to the side bars. I don't like the split rail things, although I do have some of those too. The bolted kind are a bit more expensive, but not like those Millennium frames or Omanik or any of those other fancy things that cost more than my entire stand (which is the most expensive cross stitch thing I have ever bought). Here it is, the extra bar screwed at the top (and a split rail behind it):

So I added more things to the Lowe's cart to built a stablizer bar for the longer projects, more hanger bolts, washers, more knobs and nuts, more 1x2's for more side bars, and then I realized that I basically almost had the same amount it would cost me for "real" scroll rods for all but the big two projects and I could just use my much dreaded Q-snaps for the two biggies. It's not ideal, but why spend more money to build more stuff (which I hated the entire process of) and there was still a chance it didn't work and I would end up buying the scroll rods anyway. It was the lesser of two evils and I had really had enough by that point. Like I've said, a woodworker I am NOT. So, off to Amazon I went, and bought everything I needed. Yes, I did spend more, but it was well worth it for the lack of trouble.

It's not better than those super-expensive frames that are strong enough to be 48" long and hold everything taunt, but it will do. Now, here comes another rant...when it comes to cross stitch accoutrements, needle minders are a big yes (I kind of think of them like Disney pins, collectible, but usually not that expensive, so it's something I can justify, especially since I can make them myself), but all the other stuff...expensive stands, francy frames, scissor fobs, and especially fancy project bags, nothing but decorator swag and all I can do without. If someone can sew and make their own project bags, then cool, but I can't sew. I'm a bobbin person, so I keep each project in their own bobbin box. I use paper patterns (along with apps), so bobbin boxes and paper also aren't that conducive to project bags. I also don't stitch on the go, or have a craft room to store everything in. I keep all my WIPs on a bookshelf behind my chair (a piece of which you can see above). The scroll-rodded projects in a clothes hamper on top, the bobbin boxes with the row of sheets I'm working on stack neatly on the next shelf, the shelf below that is the three-ringed bingers that hold each printed project in their entirety lined up (or, for the smaller ones, the zip plastic envelopes), and the bottom shelf is old lapstands (probably, soon to be the new WIPs). It's all tight and confined, but definitely no room for another container for project bags.

And just to add to that, same with those new chip system thread keepers, both the hanger kinds and the bobbin kinds...a whole set of those is about $250...I mean, seriously? I can buy 500 bobbins and five thread box for under $20 (and Michael's thread boxes come with 100 bobbins in each box, so that's 1000 bobbins). Then, you have to buy these foam inserts for those chip things to go into either an Ikea or another storage system (both of which ain't cheap either)...I live in a trailer. I ain't that rich and I don't have the room. I think, even if I won the lottery, I wouldn't own those things. It's a waste of space having the bobbins spread out like that like rings in a ring box. But to each his own, I guess and if you have the money, I guess you can spend it on whatever you want.

I also think my issue with project bags is tied to my OCD...I like bobbin boxes because I have the entire project's thread in one area, all together, neat and clean. The thought of throwing a few bobbins in a bag separate from the set drives me insane. I wouldn't be able to do it. Plus, I just don't work that way. I won't know which direction I'm working in until I get there, and if I don't have the next color, I would go into panic mode. It's why I carry a 400lb purse around. I carry it all because you never know when you need it all. Irrational? Maybe. But it's how I'm built.

Now, having said all that, I did buy those cheap Amazon project bags so I have something to keep the larger Q-snap projects in. Hopefully, I don't end up with the issues I had with Sleepy Hollow because I left it in the Q-snaps all the time. I'm only going to be using them for Blue Marble and Bookshelf and neither one of their bobbin boxes is going to fit in the project bag since they are supersize bobbin boxes, but it is what it is. It's really just to keep the fabric safe. I also expect that the process of putting the projects in and out of the snaps is going to make me dread working on them. We'll see. I only have one grime guard (it's the purple thing hanging off my hamper above and yet another one of those luxury stitching items I don't see having dozens of), and I don't intend on buying another one, so it will have to be shared between the two.

Enough ranting, let me show you what little stitching I've done...oh yeah, but first, here is the coverage of 28ct Lugana that I meant to show you earlier...it's good coverage, but you can still see material underneath. Thanks again to Leonore and Sleepy Hollow for making me feel better about not switching Bookshelf to 25ct. Plus, after putting the 28ct Lugana magic count on the scroll rods to test it, it's awfully thin, so now I'm worried about it because this Lugana is way thicker. But here's Sleepy Hollow's coverage:

Here is where I left off last time:

And I may regret it, but I stopped taking pictures all the way across, just to where I am, so that way the picture isn't so long and maybe you could see it a bit better, but it's still only two days of stitching since last time, so not much progress:

In the middle of Sunday, I also decided I was ready to move on from Sleepy Hollow, since I couldn't start one of the new ones (which was the plan and why I started building the new frames...I'm getting heated just writing this), so I went back to Night Wish since I barely got to work on her last time because of lapstand issues. I left off on her here back in November:

And again, since this was barely a third of a day stitching, not much progress, plus, as irony would have it, I ended up back in the Petit Treasure Braid! I mean, seriously?

For some reason, everything I ordered from Amazon is not going to be here until next week some time, so I'll be lucky to get every new project started by the end of the month. I can probably start on Bookshelf and Blue Marble, since I have the Q-Snap now, but as it stands, the very thought of Q-Snaps makes me cringe. I would rather wait and start the others first. HUGE props to everyone who uses Q-Snaps and loves them!

I can say though, one good thing did come out of this whole disaster...the side bars I made for my scroll frames can be used with the dowels from my bought ones. For some reason, I have a TON of the dowels, but not enough sides. Now, that issue is fixed. And wingnuts (which I also bought some of because I didn't know which I would want, the knobs or nuts), will work just fine with the store bought dowels. I'm not sure about the knobs yet, but I kept them just in case. I haven't thrown anything else out yet (because I'm a pack-rat), but I probably should. I doubt I will have use for those dowel rods anymore, especially the ones with hanger bolts hanging out the ends.

Not much luck on the stitching front

Turning Hook upside down actually worked pretty well...eventually. I learned (almost the hard way) that the direction in which you stitch is the same upside down. I made it across an entire row before I started to panic and question whether I needed to frog it all. My bottom stitches go ///// and my tops go \\\\\ (and I'm not too picky about which I go in first, top holes or bottom holes), but turns out, even upside down, they end up in the same direction! But what I did discover about three rows in was that I was one column short, and it was causing complications since I was working left to right (like I always do), but it's technically right to left upside down, so I was going from the far right edge to the area I had already worked, and I was meeting an area I was already up to and coming up short. It took me the three rows to figure it out. If I would have continued right side up, I'm not sure I would have figured it out if that final column stayed white all the way down. It was all pretty tedious work and I had trouble stitching last week because of a headache anyway, so I only went from here:

to here (with the extra column added) and I marked the page breaks to make it easier for me to figure out where to stop:

I can continue the white upside down, but I can't stitch the entire thing that way, it's too hard for me to figure out symbols, which was what I was afraid of. My brain doesn't work that way. And I had decided I'd better switch projects again because I was losing interest, so the only real project left in my WIPs (at least now) is HAED's Sleepy Hollow Mural by Lewis T. Johnson. I believe it's a retired pattern (which I guess means I have two retired HAED's in my WIPs). In case you don't remember it:

It was the first project I ever tried on Q-Snaps since it was so long, but I had a horrible time with them, so I put them on the longest scroll rods I had (the fabric is still folded at both ends because the rods aren't long enough...if I have enough dowels left, I may make a new set for this one too). I left off here back in May of 2020:

And again, it was a headache week, so I only managed two measly stitch days on it, although I did spend one night alone just reattaching it to the scroll rods because it was another one that had come loose (plus, I tried to straighten it up a bit, it is stretched crooked because of the Q-Snaps, so it's taped to the rods in a really weird way). It' also Lugana, so that may have been why the fabric couldn't hold up well against the Q-Snaps. I also replaced my Mad For Minders Sleepy Stitch needle minder for one I made myself from a magnet I got from Plymouth, Mass:

Two things about this one have been an eye-opener. I know it's Lugana and even though it's 28ct, I can see the fabric through the thread, so it squashes the idea of 25ct for good. I thought I had already killed the idea thanks to you guys (especially Leonore, thanks girl!), but it must have still had a breath or two left because I was finally able to nail the coffin lid closed. 25ct Lugana is NOT for me, it's official. If I can see the fabric on this, then 25ct would be even worse!

Secondly, it's not nearly as long as my new Bookshelf will be, but it is really horizontal, and I can already see that long horizontal projects are going to be a problem in this new K's Creation Stand. It won't hold it well. I already have a concrete block holding down the base, but I had to add one of the buckets of water that I got when our water was off on top of the block because it was still tipping over (all three water buckets were still sitting in my foyer). Even tightened, the entire arm still gives way under the weight of it when I turn it away, so it probably means I won't be able to keep the project in the stand when I'm not stitching on it. That's a pity. I'm a bit scared the weld is going to give if I keep it on it long-term. Once I get some bills paid down, I may just have to spring for a Lowery stand or maybe even an Omanik (just the thought makes me cringe!). Stitching is definitely a rich person's game!

Speaking of which, I had every intention of building my new scroll frames this weekend. I didn't. I watched TV and worked on my family tree. I definitely am a cyclic person when it comes to hobbies I think, but the frustration with the stand was keeping me away from it this weekend. Oh, and in case you're wondering how I'm going to build these scroll frames, this is the video I'm getting my inspiration from:

I think I'm worried about the supplies. I bought what she recommended, but I think the hanger bolts are too big for the dowels, which means, if I replace them with a smaller size (and I'm not savy enough to know which way to go in bolt size to go smaller), then I also have to replace the knobs, so more purchases and more waiting for orders to come in. And, I'm not sure why I'm so scared of dealing with the drill. Granted, I don't have a fancy battery drill, it's an old plug-in kind, but it's not like I haven't built a ton of furniture in my day. I'm not a delicate flower, but it has been YEARS since I've even touched that drill...part of me is scared I'll put it out and it won't work and I'll have to buy one of those too! I'm more of a screwdriver kind of girl, but this project definitely calls for a drill. I think I've worked it up in my head to be more than it is, but I'm still watching long scroll frames on Amazon and part of me wonders if I wouldn't rather spend the money to buy one rather than deal with the stress of building one...money versus stress or the stress that spending the money will cause? It's a never-ending cycle.

Still having trouble stitching

I think I'm going to move on from Sleepy Hollow this week. I just don't have the motivation to work on it. I think it's partially work's fault...I get home and I'm just too worn out to do anything but watch TV and zone out, but still, I think that Sleepy Hollow just isn't the right project for me right now. I can't really tell that it's even moving, although I only worked on it two days (and barely even that because I kept getting distracted). Here is where I left off last week:

And, now that they are side-by-side, I can see it moved a bit, which makes me feel a bit better, but not enough to keep on it:

And, for the record, it is kind of hard to stitch on this long frame with this little monkey in his usual position underneath me...on the old frame with the shorter scroll rods, it's not a problem, but he gives me the evil eye when I elbow him in the head a lot!

I think the confetti is just wearing me out. I'm not sure where I'm going to next. I need to work on something that I haven't worked on in a while to keep up the rotation, but the pickins are gettin slim. I think all I have left are Hook (black and white hell), Suteki (more confetti hell) and Faces 167 (which is 32ct and, considering the state of my eyes right now, I'm not sure that's the best way to go either). But no more new projects until I finish one and I don't want to restart the rotation until I move through them all. I think I'm leaning toward Hook...we'll see.

Technically, I do still have Tartan B, A Summer Ball (the project I hate the most) and Disney's 35th Anniversary (which is still hilarious considering Disney World is coming up on it's 50th now), waiting in the wings, but I doubt those projects will ever get touched again or, if they do, it won't be for more than the 5 minute intervals that they get every couple of years. I just HATE them SOOOO much! Tartan B is SOOO tiny, I should have finished it in like two hours, why it's taken me years I have NO CLUE! A Summer Ball is going to look fabulous when finished, but I despise it SOOO much, all those partial stitches that HAEDs have spoiled me against, I just can't imagine going back to it. And poor 35th Anniversary. That project is doomed simply because of the dark fabric and my bad eyes. I do use a lightbox when I stitch it, but that in itself kills my eyes and gives me a headache. I'm not really a fan of inducing a headache if I can help it. Had to learn that lesson the hard way I guess.

Speaking of disliking things, what do you guys think of the changes to Blogger? I worked with it for about two hours a couple of posts ago before I switched back to Classic. Either they don't have the bugs worked out, I'm just stupid (although I'm gonna give myself the benefit of the doubt on that one), or it just sucks! I like the look of it visually, it's just not good in practical use. I hope they get it ironed out before they decide to do away with Classic! I haven't played with it since, so if it's gotten better, or if it does, let me know (or if you guys have figured out the trick to it where it's not mixing in the HTML code, I'd love to know!).

Stitch Switch

I tried really hard to stay with Maleficent, but after a week of just staring at her and not stitching a bit, by Saturday morning, I knew I had to switch to keep my stitchy mojo moving. I'll get her finished, just not now. At first though, I had trouble deciding which project work on next. I wanted to work on one that I haven't touched yet this year, but the pickins' are gettin' slim kids. One of the reasons I don't work on Sleepy Hollow Mural much is because it's in a Q-Snap...mainly because it's a horizontal piece and I didn't have scroll rods long enough, but also because I very quickly realized that I hate working with Q-Snaps! They are just square hoops for me, I have to work one-handed again, which seems like a reversal back to childhood stitching. It slows me down because I can't use two hands to stitch since one has to hold the frame. I also tend to hold on too tightly with my right hand (since I'm a dominant leftie) and I end up with a cramped right hand that has to be pried off the edges of the frame after a few hours and then it's a useless piece of flesh for days afterwards. Major props to you guys who can use them though, they just aren't for me!

Another major mistake I've made with this project is that I never take it out of the Q-Snaps, so it's been wrinkled up all this time. I HATE trying to get it set and centered, which is hard for me to do with the Snaps (I'm just really bad with them), so I just left it and hoped it wouldn't get too squished. But I also didn't plan to take a year off stitching and all the other life hurtles I've had the past couple of years, so I wasn't planning on leaving in the state it's been in all this time.

But back to Saturday morning, I pulled it out, took it off the Q-Snap and it looked really good, all things considered...no squishing, despite some of the stitched area being under the framed area (for a very long time) and, as I started to examine the length of it, I remembered I had a set of scroll rods that were long, but not quite long enough. I had plan to buy longer ones, but the American Dream ones are SOOO expensive, I just never did. I also planned to go to Lowe's or Home Depot or somewhere and just buy long wooden poles and make my own, but since I never go anywhere (and now I can't, literally), that will probably never happen either.

A while ago, I did buy just some really strong velcro from Amazon that I "thought" would work better than the American Dream scroll rod velcro, which is expensive (considering the amount you get for the price). I literally bought this "supposed" strong velcro for both sides in HUGE rolls for the same price that one tiny roll of one side of the AD stuff is (you have to buy the fabric side and the rod side separate). But, as per how Hook turned out, the velcro wasn't as "strong" as it claimed to be. I even went back on Hook and added the old tape I used to use to attach projects to rods on top of the velcro and it STILL wouldn't hold (more on Hook in a minute).

I went ahead and gridded out the rest of the pattern horizontally, just to see how long it actually was, and I had my usual three inch border on either side. I realized, I could cut that down to two inches, fold it in and, since these were the American Dream scroll rods that use the velcro-type tape stuff, I could just tape it down with the folded edges (although I would have to be careful when I stitched the edges and made sure I didn't stitch the folded down parts into the project. I also had to put it on my American Dream lap stand, which again, I'm not a fan of because it's too short for me (although I adore their scroll rods), but the stand can hold the weight of the longer rods better than mine and it has a stabilizer bar that goes across the top to balance them. But at least now Sleepy Hollow is in scroll rods!

While I was at it, I went ahead and used the last of my American Dream tape to stick Hook back down to his scroll rods too. It's why I didn't get much stitching done on Saturday. Between all the work getting Sleepy Hollow reset and remounting Hook, a good chunk of the day was gone.

Anyway, on with the pics! Keep in mind, this is only two days worth of work and I didn't work that much because I was too busy on Saturday trying to figure out plans and then switching to the stand and then trying to get the stand stable and then trying to get comfortable with the stand (and then dealing with Hook which I don't know when I'll work on again...why I EVER bought a black and white pattern, let alone four, I'll never know!). But, first things first, here is where I left off back in December of 2017 (WOW...seriously?)...and, of course part of it is cut off because of the Q-Snap:

And again, only barely two days work, but here we are (and at least you can see the whole thing again), you can also see the folded edges here on either side...I really hope that doesn't bite me in the butt:

It is a bit "bend" at the front corner and that is a side effect of the Q-Snaps, but I think I can fix that when I frame it...hopefully. To add to the crappy stitching excuses (I'm apparently full of them this time), I didn't take my Ritalin on Sunday for some reason, and I didn't have the motivation for ANYTHING! It's amazing how quickly that drug changes your production value. How I managed my entire life up to my 30's without it, I have no clue! I had also forgotten that, for a non-dithered piece, how confetti'ed it is! I'm not sure if the whole piece is this way, or if it's just the sky, but I have to change colors a LOT! I wish I could park, but a) the hanging strings, even with "cord management" would drive me insane and b) I couldn't keep track of all that hanging string anyway. I'm just not that talented. But if I could park, this would be the project for it.

I also didn't have a good needle minder to match this project (gotta work on that), but I thought a sleepy Stitch was an interesting match, so it will work for now. And just to show how long this thing is...it takes up my entire sofa table, which also shows how it is a bit uncomfortable to stitch on the couch. I probably should move back to the chair, but I've sat on the couch (and slept, and lived) for so long now, I wouldn't know how to function in the chair again. Plus, the pups prefer me stitching on the couch because they can snuggle on me better while I'm stitching (which also hinders my work, but makes them happy, so I can't really complain about that). Here is my very junky coffee table and Sleepy Hollow Mural taking up the width of the entire thing:

But, since it's so long, I might also have to change how I take pictures of this thing. Maybe a whole shot and then a close up of the actual stitched area. I might try that next week. Today is Wednesday, and I haven't stitched a single day this week, but this has been a really CRAPPY work week, so I haven't been in the mood to stitch. And whoopsy on showing the pattern, but if anyone can tell ANYTHING from that one page, good on ya!

Weekly Stitching

Well, I didn't have a two day interruption this week, but I finally stopped fighting that expensive American Dreams lap stand and just held the stupid Q-Snaps in my hands. It slowed me down, but I was still able to stitch two-handed, I guess since they are long ones and able to sit in my elbow bend. It's just a shame that Q-Snaps won't fit in my regular lap stand. I worship that thing! I left off here last week:

Along with the slowness, I'm also getting extremely bored with this piece, but I did make it to here:

I'm not sure if I'm going to hold out with it until the end of the year or not. I've almost finished two of the eleven left in the row, but I seriously doubt, at least at this rate, I'll ever make it. The Bride Dollmaker is calling me again too, but I don't think I have a snowball's chance with that one either since I have four full pages on that one...but four pages are better than nine. Guess it will depend on how I feel tomorrow.

This week was also Christmas bonus time...we don't get a lot, but it's better than nothing. If I was smart, I'd use the money to pay on that stupid massive hospital bill or to pay down my credit cards, but instead, I hit up my Amazon wishlist like it was Christmas! I wish I could say that I regret it, but I don't. I'm so far behind on my figurines (and don't get me started on the Funkos and books), but the odds of me ever getting caught up is next to nil.

I had initially planned to use the money to take a little trip down the coast to some Florida shelling beaches, but I still don't think I'm ready for that just yet, although I seriously want to. Who knows, maybe I can save up a few bucks between now and then and see what's possible.

Weekly Stitching

It took me exactly two days to finish up the row on Happy Haunts...the two days I missed last week due to missing bolts. I left off here:

And shined it off easy-peasy:

I immediately started back on Sleepy Hollow Mural, but then I ended up with a massive headache that lasted...wait for it...two days. So I ended up yet another week with two missing stitching days. I left off on the Hollow back in May about in the middle of page 3:

And stopped Saturday night here, wandering loose in about page 6:

I didn't stop because I got bored and I'm obviously no where near finishing the row...the end of the grid row is just the halfway point. I have eleven pages to go on this row. This project is really hard to work on because of the stand. I have to keep my arms held up really unnaturally high and they hurt after a while so I end up taking more breaks than I want to. But the real reason I stopped is because I realized that I haven't finished a single project this year and had no hope of doing so on my current path.

I had been binge-watching X-Files for the Dec 3rd premiere of the new season, but I was blowing through it too fast, so since I also picked up Season 12 of Supernatural the other day, I decided to take an X-Files break. I started on Season 1 of Supernatural Friday night and I'm already in Season 3 (when I say binge-watching, like everything else I do, I do it on steroids). That reminded me of a cool chart I bought off of Etsy. I had found it a long time ago and it stayed in my wish list for a while, but when I got ready to buy it, it had disappeared. It took me forever to find it again, and once I did, I snapped it right up. I haven't seen it again since, so I'm glad I got it when I did.

I started it Saturday night and despite a few hiccups with thread choices and whether or not I was going to do the Impala, I give you Supernatural Exorcism:

The white thread wasn't called for, but it was supposed to be stitched on white and, since I used 18ct Shale (I was going for that earthy, down-home boy quality...or graveyard dirt...choose your poison), the whitish areas looked weird in shale, so I stitched them. I just left the windows blank because, well they're windows. I also ended up outlining more than called for because it looked weird. I used Aida for the white, but I used 12 Cotton Pearle for the black and I really like how it worked for the letters (not so much for the car). I also flipped the car (it was originally pointed the other way and it just looked weird to me).

I wanted to check the wording for the exorcism and thank goodness for wiki fandom! I discovered they've done numerous worded exorcisms throughout the seasons, but they have used this one at least twice so I was OK with it.

I need to find a really cool gothic frame to put it in, but I think I'll take it to work. I like to keep my co-workers on their toes (or scare them, again, pick your poison). But hey, now I can say that I've had at least one finish for the year! I'm gonna start back on Sleepy Hollow again tomorrow and continue on it through the rest of the year (unless I manage to finish the row and I'll move on).

Hope everyone else had a good stitchy week, or just a good week in general!

Weekly stitching, new stash and a bit of a ramble

I spent the week working on Sleepy Hollow Mural. I did manage a bit last Sunday and left off here:

And I stopped this Saturday night here:

I got quite a bit done including the second page and a big chunk of the third page. I'm quite proud of that, especially considering my week (but more on that later).

I decided it was time to go back to Snow White. I left off here back in February:

I couldn't help myself and started late Saturday night, but the majority of the work got done today and I left off here:

She'll be my focus for this week and next weekend, but this is going to be the work week I've been dreading for a month now, so I doubt I'll get much further...at least not until the weekend.

As far as this past week, I ended up having to go to an out of town clinic for work that just happens to be in an old haunted hospital on Tuesday. Aspers tend to have heightened senses and it's probably one of my strongest Asper traits. Places like that tend to raise my hackles and turn my insides to mud. I have enough trouble dealing with the travel associated with my job (which, thankfully is rare), but that was one of the worst work days of my career.

To add insult to injury, on Thursday when I complained to my shrink about the weight I've been gaining due to the meds, she decided to pull me off the anti-depressant without replacing it with another (dropping off one while adding another tends to balance things out, but weening off one by itself it a very physically sickening process). She kept me on the Ritalin, but I'm not ready to be AD free just yet and I'm panicked. So, on top of all the extra work hours this upcoming week and dental surgery for both Bam and I the following week, I'm going to have to do it all while DT'ing from the meds and going back to dealing with life in a way that I haven't had to do in a while. Ugh. At least Bugs had a good week!

I did take advantage of the HAED sale and added a few more JBG's to my stash (like I needed more), but I also splurged on my very first GeckoRouge kit. It was hard to decide...I was debating on the one I chose versus a design of Captain Hook/Killian Jones from Once Upon A Time. I really want to do another Once project, but it's been really hard to find one I absolutely love. I liked the Hook GeckoRouge kit, but I didn't love it.

There was another deciding factor...on a whim I emailed Tilton Crafts about Daniel Kordek's Once designs to see if they ever planned on charting them. I have his Hocus Pocus and Merida patterns already and I LOVE his Once designs (except for the fact that he doesn't have one with Charming). They told me that they already have at least one being charted up right now! Excitement!

So I went with The Dollmaker instead because I love this pattern and it felt more like me:

Seriously? Baby doll Freddy and Jason? I LOVE them! I bought the 25ct magic guide with 1x1 threads, but I think I'll probably use my 28ct Monaco instead. I ordered a matching needle minder from another Etsy seller too, so it made me even more happy with my choice.

Speaking of Once Upon A Time...I tried to binge watch it this week to break my Heartland obsession, but I ended up watching the show more than stitching so I ended up going back to Heartland. I'm obsessed with Heartland too, but not to the degree that I am with Once right now.

The musical episode of Once tonight was a mixed bag. I kept thinking how cheesy it was the entire time, but I was still singing along (yes, I bought the soundtrack the second it came out) and bawling like a baby at all the right moments. My favorite song?

Seriously, I hope the show doesn't get cancelled...it will break my heart! But Once and stitching does not go well together! Granted, I could use a huge dose of fantasy right now, but I think stitching might be better therapy...that is until the "shakes" start.

Weekly Stitching

I got my New Stitchy Start Blog post done on time this month (for once) after spending the week working on Happy Haunts, so I had today free to start the next rotation, Sleepy Hollow Mural. I left off here back in January:

And managed to barely get started on the next page today:

I tried to focus today, but it was a rough week (so what else is new?). At least I just got started on this week's rotation, so Sleepy Hollow has a full week to go.

I finally managed to break my Heartland obsession after my ninth viewing of the first nine seasons (or at least I hope I have, and probably only temporarily...until season 10 comes out on DVD). I broke down Friday night and turned Netflix on and watched Bridget Jones' Baby (which I LOVED!) which put me in an Austen mood. I was too lazy to get up and pick a disc (it was 2 am), so I watched the best parts of North & South on Netflix with the intention of starting Saturday's viewing of the Austens. But, by the time I got up, I had a very clear path...Once Upon A Time. Considering it's just a few more episodes before the end of the season (and possibly the end of the series), I wanted to remember all the best moments of my favorite TV show.

Besides, since we've been having serious storms this past week, I needed a bit of serious fantasy to refocus my brain. My sister's house just barely missed getting hit by a tornado last week. It tore down their fence and damaged a lot of the other houses in their neighborhood, but they got really lucky. And Saturday, me and boys came pretty close to the same fate (although I think my trailer won't fare nearly as well as her brick and rock house). We also got massive flooding around town this weekend, so the drive to work probably won't be too fun tomorrow. The joys of living in the South during tornado season!

Weekly Stitching and stuff

First with the stuff...

Introducing Bugsy! He's still pretty sick...not from the heartworms but rather from the infection in his lungs caused by the dying of said worms. He's not allowed any stressful activity, which includes bathing or hair cuts and we all know how I feel about hippy Shih-Tzu's! Guess I'll just have to deal as best I can.

He's quite a bit bigger than Bam, but they had an almost immediate connection, so what could I do? So huge vet bills and hippy dogs I must deal with because I'd do pretty much anything for Bam. Bugs is about 2-3 years old and has had a pretty rough life, but not anymore! Tomorrow is his first real day with Bugs without me, so I'm still a bit worried, but I'm hoping it will go well. Knowing me, I'll probably be checking in on them numerous times throughout the day.

As far as the stitching goes...last week I left off here:

and I FINALLY finished the first page and a bit:

It's confetti hell, but I've pretty much loved every single bit of it! I'm so excited about how the fog streams are turning out!

Granted though, next week is a new one, so on to a new project. It's time to finally start Happy Haunts, my A New Stitchy Start blog post, so I'll be showing my progress on Haunts on the end of the month over there. It's kind of nice to be back to a rotation again...I missed working on some of these projects!

Weekly Stitching

One week I'm blazing through stitching, and the next week I barely had any time. But first, A better picture of Lilo and Stitch Otherwise:


Between work and other things, I barely managed a day's worth of stitching all week. I started on Sleepy Hollow Mural and didn't make it much further than a start...not even a fifth of a page.

It's my first time working with a q-snap and it would only fit in my worst lap stand. The stand is too short for me and I have to sit it up on my leg instead of the desired underneath. That puts it too high and I'm stretching in weird ways to reach the upper corners and it makes my arms sore, so I can't stitch for very long anyway. Until I can figure out a way to extend the leg of this monster, my stitching will be limited on it. Funny thing is, it's the most expensive stand I've ever bought. My cheapo lap stand works a thousand times better. But I'm so into Sleepy Hollow Mural right now, I'm not ready to stop, so I'm going to give it another week.

Besides, next week could possibly bring a very exciting "change" to our family and I've got some extra time off next week (if they leave me alone), so I'll have some extra stitching time. I don't want to jinx things right now, but there will hopefully be a good news post come Wednesday or Thursday!